Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Repair for Alpharetta Homeowners
Garage door repair in Alpharetta typically runs $150 to $600, and most spring or cable failures can be fixed the same day we come out. The most common call we get from Alpharetta homeowners is a door that stopped opening around 7 a.m., usually because a torsion spring snapped overnight. If that’s where you are right now, call (678) 679-2096 and we’ll get a technician to your house today.
Servo Garage Doors has operated in Alpharetta since 2015, and Marcus Deller, our owner, built the company on a rule that still sets us apart: photograph the failed component before you quote a replacement. That rule became Clause 4 of The Haven Standard, the written system we work under on every job. We’ve made more than 18,000 garage doors right since we started, and every single one left with a written price agreed before work began and a documented photo record when the technician pulled out of the driveway. No exceptions.
We’re not the only garage door company in Alpharetta. We know that. But we’re one of the few that will show you the broken spring, the frayed cable, or the stripped gear on the opener before you spend a dollar. That’s the difference between a quote you can verify and a quote you’re expected to trust.
What Our Garage Door Repair Service Includes
Every repair job covers the same ground: diagnose the failure, show you what we found, quote a flat written price before any work starts, complete the repair, then hand you a photo record of what was found and what was done. Here’s what that looks like across the six most common repairs we handle in Alpharetta.
Panel Replacement
A damaged panel isn’t always a full-door problem-Panel Replacement can often solve it. If a vehicle backed into the bottom section or a storm dented the face of the door, we replace the individual panel instead of selling you a whole new door when you don’t need one. Panel replacement in Alpharetta runs $250 to $500 depending on the door’s make, insulation type, and whether the panel is a standard size or needs to be cut to match a custom track profile. We order the panel to match your door’s manufacturer and finish, and we photograph the old panel’s damage before quoting the replacement, per Clause 4.
Spring Repair
The torsion spring is the coiled steel shaft above the door that does the actual lifting. When it breaks, you’ll hear a sound like a gunshot from the garage, and the opener motor will strain without moving the door more than a few inches. Spring repair in Alpharetta runs $180 to $340, which includes both springs replaced as a matched pair, not just the broken one. We carry springs on the truck for most door weights and wire diameters, so a spring repair is usually a one-visit job.
Cable Repair
The lift cables run along both sides of the door and do the bearing work with the springs. A frayed or snapped cable means the door can come down off-balance, which is dangerous and gets worse if the door is cycled while it’s broken. Cable Repair in Alpharetta costs $130 to $250, and the fix involves replacing the cable, checking the drum it winds on, and rebalancing the door so both sides lift evenly. We replace cables in pairs, because a cable that’s worn to the point of failure on one side will be close behind on the other.
Track Realignment
The track is the steel channel the rollers ride in from floor to ceiling. If the door bangs, shudders, or lists to one side on the way up, the track has moved out of true, usually because a bracket loosened or the house settled. Track realignment in Alpharetta costs $120 to $240, which covers re-shimming the track to the correct gap, tightening every bracket, and running the door through a full cycle to confirm it moves without binding. A door that runs crooked wears rollers, hinges, and cables out fast, so catching this early is cheaper than the chain of failures that follows it.
Roller Replacement
Rollers are the small wheels that carry the door up and down the track. Nylon rollers wear quietly over time; steel rollers get noisy, especially on a door that’s been in service for eight to ten Alpharetta summers of heat and humidity cycling. Roller Replacement in Alpharetta runs $110 to $220 for a full set, and we recommend nylon rollers for anything attached to a living space, because they run noticeably quieter than the steel originals. Worn rollers load up the opener motor and the door panels, so this is a repair that prevents a bigger one.
Sensor Calibration
The photo-eye sensors sit about six inches off the floor on both sides of the opening. If they’re misaligned, dirty, or starting to fail, the door will refuse to close, reverse immediately on contact with the floor, or blink the opener lights at you in a code you’re not expected to know. Sensor Calibration and repair runs $120 to $180 depending on whether the fix is an adjustment, a cleaning, a rewire, or a sensor replacement. We check the sensors on every service call, not just when you report a door that won’t close, because a sensor that’s on the edge of failing will strand you at the worst time: backing out for work with a door that won’t go down.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Repair
We service all eight major garage door and opener brands, including LiftMaster, Chamberlain, Genie, and Clopay. On LiftMaster openers, the most common Alpharetta failure we see is a stripped drive gear, which the motor clicks loudly instead of lifting the door. We carry the replacement gear on the truck and can usually have a LiftMaster running again the same visit. On Chamberlain, we see a lot of logic board failures from power surges, and we diagnose those by voltage testing at the board terminals rather than guessing and swapping parts.
On the door side, Clopay is the most common residential door in north Fulton, and we stock Clopay panel sections, hinges, and bottom seals for a faster turnaround than ordering from a distributor. For Genie openers, the limit switch and travel module failures are routine, and we set the travel limits by measurement rather than by “close enough” feel. Whether you’ve got one of these brands or any other make, we can help, and we’ll never tell you a door is unserviceable just because we’d rather sell a new one.
BeforeAfterSigns You Need Garage Door Repair Right Now
- The door only opens a few inches and then stops. This almost always means a broken torsion spring. The opener is still working, but it can’t lift the door’s weight by itself. Call before you keep cycling it, because the strain on the opener will burn out the motor, and then you’ve got two problems instead of one.
- The door is louder than it used to be, and not in a consistent way. A grinding, popping, or banging noise means something mechanical is failing: a roller with a flat spot, a hinge pin wearing out, or a track that’s shifted. A door should sound the same every cycle. If it doesn’t, something’s changing, and it won’t change back on its own.
- The door sags to one side or hangs at an angle. A door that’s visibly off-level means a cable or spring issue on one side, or a track that’s been knocked out of alignment. Running the door like this will chew up the rollers and the track and can pull the door off its track entirely.
- The door reverses before it reaches the floor, or won’t close at all. This is a sensor problem or a limit setting problem, and both are fixable in one visit. What matters is you stop pressing the wall button to force it down, because a door that won’t close on its own logic is a door that shouldn’t be forced.
- The door is slow to open, then faster halfway through. A properly balanced door moves at the same speed through the whole travel. When it slows at the start, it’s usually a spring losing tension or an opener gear wearing out. Both are cheaper to fix before they fail completely.
Our Garage Door Repair Process - Step by Step
Every repair job in Alpharetta follows the same sequence. The point is that you know what leaving looks like before we arrive, and you have the paper trail to prove it after we leave.
- 1
You call (678) 679-2096 and talk to a person. Not a menu, not a callback system. We take your name, address, and what the door is doing. If it’s an emergency, we tell you which technician is coming and when, and we text you when they’re on the way.
- 2
The technician arrives, diagnoses, and photographs the failure. This is Clause 4 in practice. Before any price is discussed, the failed component is photographed and shown to you. A torsion spring with a clean break at the coil. A cable that’s frayed down to two strands. A logic board with a burned relay. You see what we see.
- 3
You get a flat, written price and a written scope of work. Clause 1 of The Haven Standard: the price is written, the work is defined, and nothing starts until you approve both. The price you see is the price you pay. No “we’ll have to see once we get into it.” We already got into it. That’s step 2.
- 4
The repair is completed and tested through multiple cycles. Springs are wound to the correct torsion for the door’s weight, cables are seated on the drums, sensors are aligned and tested with a measured break test, and the door runs through the full open and close cycle several times. The door leaves balanced, not just “working.”
- 5
You receive a documented photo record before we leave. Photos of the failure, the repair, and the finished result are delivered to you, and the written warranty for parts and labor goes with them. If the repair isn’t right, the 365-Day Done Right Promise means we come back and make it right. No argument, no renegotiation.
How Much Does Garage Door Repair Cost in Alpharetta?
Most garage door repairs in Alpharetta fall between $150 and $600, and the spread comes down to which part failed. Here’s the breakdown by repair type, based on what we’ve charged across thousands of jobs in this market:
| Repair Type | Typical Cost in Alpharetta |
|---|---|
| Spring Repair | $180 - $340 |
| Cable Repair | $130 - $250 |
| Opener Repair | $120 - $320 |
| Opener Installation | $250 - $550 |
| Panel Replacement | $250 - $500 |
| Track Realignment | $120 - $240 |
| Roller Replacement | $110 - $220 |
| New Door Installation | $700 - $2,200 |
What moves the price within those ranges: the door’s weight and spring size, whether it’s a single or double door, how old the hardware is, and whether we have to order a specific panel finish or opener model. What doesn’t move it: how nice your house looks, what kind of car is in the driveway, or what we think you’ll pay. The price is the price, and it’s based on the work, written down before we start.
If another company has already given you a written estimate, bring it. We’ll give you a free second opinion on it, and if the work they quoted doesn’t match what we find, you’ll see that in the photo record too. Estimates are free, and the number we quote is the number on the invoice.
Garage Door Repair Near Alpharetta - Our Service Area
Our home base is Alpharetta, but we run trucks throughout north Fulton and south Forsyth every day. We handle garage door repair in Roswell and garage door repair in Johns Creek, plus Milton, Duluth, Sandy Springs, Cumming, Holly Springs, and the surrounding communities. Response times depend on where the technician is and what the call is, but we’ll give you a straight answer on the phone, not a window.
Serving Alpharetta, GA - Our Local Coverage Area
We’re based in the Alpharetta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Repair in Alpharetta
Garage door repair means fixing a specific component that has failed or worn out, rather than replacing the entire door. That includes torsion springs, lift cables, rollers, tracks, panels, and the sensors that govern the door’s safety stops. At Servo Garage Doors Alpharetta, repair always begins with a diagnosis and a photograph of the failed part, followed by a written flat price before anything is touched.
Most spring, cable, roller, and sensor repairs are completed in 60 to 90 minutes on site, because we carry the common parts on the truck. Panel replacement may require a follow-up visit if the panel has to be ordered to match your door’s finish. We’ll tell you the timeline in writing before the work starts, so you’re not guessing when you’ll get your garage back.
Garage door repair in Alpharetta runs $150 to $600 for most jobs, with the specific range depending on which part failed. Spring repair is $180 to $340, cable repair $130 to $250, and panel replacement $250 to $500. The price is quoted in writing before the work begins, and the number on the quote is the number you pay. Call (678) 679-2096 for an exact quote on your door.
Yes, we service LiftMaster openers regularly, and we carry the parts that fail most often: drive gears, logic boards, and wall console units. We also service Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If your opener is from a brand you’ve never heard of, we can still diagnose it, because the failure modes across openers are more similar than the badges suggest.
Yes. We offer 24/7 emergency garage door service in Alpharetta, and a live person answers the phone every time, including holidays and 3 a.m. You’ll get a named technician and an on-the-way text, not a callback window. A door that won’t close is a security problem as much as a mechanical one, and we treat it that way.
Every repair we perform is covered by the 365-Day Done Right Promise. If the repair isn’t right within a year, we come back and make it right at no charge. The warranty terms are written on your invoice, not implied by a handshake, and the photo record documents what we repaired so there’s no dispute about what was covered.
Clear the area inside the garage in front of and behind the door enough for a technician to work, and park any vehicles on the driveway or street if the door won’t open. You don’t need to test the door before we arrive, and if the spring has snapped, please don’t try to lift it manually. Have the brand and approximate age of your door and opener handy if you know them, and the technician will handle the rest.
Schedule Your Garage Door Repair Service in Alpharetta Today
Call (678) 679-2096 and you’ll talk to a person who can schedule your repair, not a phone tree. We answer 24/7, including emergency calls. You’ll get a named technician, a written price before any work starts, and a photo record of everything we found and everything we did. The estimate is free, the price is upfront, and the decision is yours.
Written by Marcus Deller, Owner at Servo Garage Doors Alpharetta, serving Alpharetta since 2015.